API Certified factory of Tricone Bits and PDC bits API is American Petroleum Institute, it is Authoritative in the world. All products are produced in lines of API specifications.

SOLIDKEY

Products Speification

Number of Blades	6
Primary Cutter Size	13mm
Nozzle Qty.	6NZ
Gauge Length	2.2 Inch

Operating Parameters

RPM (r/min)	70~270
WOB(KN)	25~115
Flow Rate (lps)	22~35
Application	Medium and compact formation with very high but no abrasive layer,such as limeston, sandstone,shale,etc.

 

Designed for higher ROP in drilling deep and medium-hard rocks,  PDC drill bits always drills from ground to bottom directly without changing another drill bit, it saves huge drilling and labor cost.

Different from tricone bits, the PDC drill bits need lower WOB but higher RPM, so it always works with mud motor to get high rotating speed. 

Quality of PDC drill bits mainly depends on quality of  PDC cutters, we provide unique solution according to specific requirement and detailed geological information.

Contact us freely to get more information.

 

 

 

Regular Models

8 1/2"(215.9mm) IADC537G	8 1/2"(215.9mm) IADC637G	12 1/4"(311.1mm) IADC537G
6"(152.4mm) PDC Bit	12 1/4"(311.1mm) PDC Bit	Bi Center Bit
24" Hole Opener	36" Hole Opener	44" Hole Opener
14" PDC Reamer	18" PDC Reamer	HDD PDC Reamer
Tricone Bit Thirds	Block Roller Bits	Block Roller Bits
Roller Cone Bits for Piling	Replaceable Roller Cone Bits	Core Barrel

 

Applications

Oil/Gas Well Drilling-Water Well Drilling-HDD(Trenchless)-Foundation Piling

Our Mission: Lower the cost of Drilling-Per-Meter. Who we are: To exploit energy resources underground. To exploit water underground. To install pipelines underground with No-Dig. To pile foundation for constructions. We are one of the people who makes above easier. Let’s work together and enjoy this job.

 

Related Catagories

PDC Bits	Hole Opener	Roller Cones (Thirds)	Piling Roller Cones