API Certified factory of Tricone Bits and PDC bits API is American Petroleum Institute, it is Authoritative in the world. All products are produced in lines of API specifications.

SOLIDKEY	PDC Bits - 6''

M137

Products Speification

Number of Blades	7
Primary Cutter Size	13mm
Nozzle Qty.	6NZ
Gauge Length	2 Inch

Operating Parameters

RPM (r/min)	80~300
WOB(KN)	10~80
Flow Rate (lps)	20~35
Application	Medium-hard to hard formations with low compressive strength , such as hard shale, limestone, sandstone, dolomite, hard gypsum, marble, etc.
Features	The M1375 is a matrix body PDC bit with 7 curved blade with back-reaming and spiral gauge protection. Optimized Hydraulie design and enhanced cleaing and cooling effects of the bits to prevent bit from balling.

 

Diameter 6" is always in the final section of hole bottom that is always more than 3000 meters depth, cost of changing new bit in deep section is very high, so the quality and working life of drill bits is very important to save drilling cost.

Quality of PDC bits mainly depends on:

1> Quality Grade of PDC cutters,

2> Body of PDC bits,

3> Design of PDC bits, including design of blades, cutters position, gauge protection, junk slot area, fluid flow structure, etc.

8 1/2"(215.9mm) IADC537G	8 1/2"(215.9mm) IADC637G	12 1/4"(311.1mm) IADC537G
6"(152.4mm) PDC Bit	12 1/4"(311.1mm) PDC Bit	Bi Center Bit
24" Hole Opener	36" Hole Opener	44" Hole Opener
14" PDC Reamer	18" PDC Reamer	HDD PDC Reamer
Tricone Bit Thirds	Block Roller Bits	Block Roller Bits
Roller Cone Bits for Piling	Replaceable Roller Cone Bits	Core Barrel

Our Mission: Lower the cost of Drilling-Per-Meter. Who we are: To exploit energy resources underground. To exploit water underground. To install pipelines underground with No-Dig. To pile foundation for constructions. We are one of the people who makes above easier. Let’s work together and enjoy this job.

Related Catagories

PDC Bits	Hole Opener	Roller Cones (Thirds)	Piling Roller Cones